The Radavist

There aren’t many modern bicycle brands that have a history quite as rich as Yeti, let alone a diehard cult following of collectors and fans for the early bikes. Coming into a steel F.R.O or Yeti Ultimate is usually enough to be considered a “Holy Grail” find for most. However, there is another bike in the early Yeti lineup that is so rare many will never see one in person and more modern followers of the brand may not know even exists. This is the story of an elusive Yeti Tree Frog…

We just covered the SB135, a Switch-Infinity-equipped, carbon fiber Yeti with just 15mm more rear travel than the SB120 that Travis Engel is here to talk about. But there’s very little danger of any overlap between the two bikes. The SB135 is one of the last mid-travel 27.5-inch bikes left in the wild, and that kinda dominates any conversation it’s in. The SB120, on the other hand, is a short-travel trail 29er: The compact crossover SUV of mountain bikes. Seems like every brand has at least one model that mixes trail-bike capability with cross-country speed. Pivot, Ibis, and Transition have a few perfect 10s on the board. Marin and Norco are strong players too, and they can do it for under $2,000 if you don’t need a carbon bike. But comparisons are always tricky thanks to Yeti’s unique design language around geometry, frame construction, and, of course, suspension. As with every Yeti, the SB120 is like nothing else in its category.

The late 80s and well into the 90s marked a sea change in mountain bike design. Suddenly bikes that were designed to ride fire roads and trails with no real intention were being hurdled down mountains at breakneck speeds. Competition between the brands within the burgeoning sport was fierce, and the race to produce lightweight racing bikes had begun. Perhaps the most infamous of these experimentations is the Yeti C-26, and today, we have some juicy photos of Juli Furtado’s C-26 WC race machine with an entertaining account of this bike’s genesis by Mike Wilk…

Today, we’ve got an extraordinary treat in our Vintage Bicycles series, brought to you by Mike Wilk with photographs by John Watson. At Sea Otter, John photographed a stunning 22″ 1992 Yeti Ultimate. This one-off bike has such a unique story; aside from being the only bike this size made in that era, it also has a Tioga Disk Drive rear wheel. It’s not every day you get to feature such a rare bird as this Yeti Ultimate, so read on for an in-depth look at what makes this bike so unique!

The mid of March is usually a time where you think about the upcoming season and what kind of adventures you are going to tackle during springtime. Suddenly, the world is closing down, throwing everyone into the status of the unknown. Leaving us with restless and raving minds. Diving into the world of bikes has always been a great way of escaping reality for me. Let it be physically or virtually – if you don´t have the chance for some saddle time.

I was blessed to have the chance of getting my first taste of ultra-cycling at the Atlas Mountain Race last February. The harsh brutality of the Morrocan rock fields brought up the first ideas for this project. Rocks and smaller stones hitting my frame and rims for hours let me think about how I would repaint my bike after the race.

We’re big into hardtails here at the Radavist. While my personal bikes are all steel, riding carbon bikes can be a real treat, especially when the company has put so much thought into the design.

Yeti has a long history of designing capable and attractive bikes. The original ARC was a collaboration with Easton and the intent was to make a truly lightweight machine in that era. The OG ARC’s aluminum frameset weighed a mere 3.2lbs, which was a groundbreaking accomplishment for 1991 and those bikes are still iconic, even today.

You could say Yeti had a lot riding on this new ARC design and there were a few decisions that set this new model on a different trajectory from its predecessor. After riding this bike for a month here in Santa Fe, I’ve finally wrapped my head around how to review it, pointing out its accomplishments and my own personal critiques of this entirely new model, so read on for more…

W.H. Bradford brought one of the most fun bikes at this year’s NAHBS. This Yeti homage has every detail worked out, from the classic looptail, to the flat top tube and even the fork, there’s not much Brad left out.

Pairing the Yeti turquoise frame with purple anodized Paul Components was the cherry on top.