The Radavist

It’s happened. The locals of Austin, Texas have embraced Lauren from Saila, the woman who welded for Seven Cycles in Boston for years, laying down tight weld lines over even tighter mitres.

Saila makes performance steel and titanium bikes ranging from “all-road” to cross and road. This bike in particular is a perfect example of a guy who wanted something special, yet didn’t want to splurge on componentry. Rather than dropping a couple grand on new parts, he built this race bike up with old parts left over from previous bikes.

Titanium is a medium that yields classic beauty without the need of expensive paint, or even expensive parts. Holler at Lauren if you’d like her to create a piece of work like this!

$600. That’s how much Jacob paid for his Team Fat Chance frame on eBay. It was in pristine condition with the original Yo Eddy! fork and a brand new paint job. Here’s when the collector would begin to scrounge up all the NOS parts to restore it to its original glory, yet all Jacob wanted was a bike he could ride Austin’s Greenbelt trails on. Even with the rebirth of a Fat Chance brand, there’s something to be said about 20-year steel frames. Especially with a legacy like Fat City.

While most of the build is straightforward, the Bullmoose bars and Velocity Cliffhanger rims, laced to Deore hubs are the standout details. Now his Onza tires are tubeless, which means he can run lower pressure and not worry about snakebikes on limestone ledges and the Deore hubs will be easily serviceable after the rain brings creek crossings.

His 1x setup was made possible by a clutch Deore derailleur and a Wolf Tooth ring, mounted to vintage Shimano cranks and braking is being taken care of by Chico’s finest, Paul Components.

For around $1,500, Jacob built up a vintage mountain bike with style and while it might not tackle a rock garden as fast as a modern full sus bike, sometimes the ride isn’t about being timed.

Cole and Jonathan at Mellow Johnny’s did a great job on the build and this bike looks so good covered in limestone dust. Shred on, buddy.

Racing and Riding the Fairdale Goodship
Words by Andre Chelliah, photos by John Watson

When Taj from Fairdale reached out to us and asked if we were interested in testing their steel road bike, the Goodship, I had a hard time containing my excitement. Fairdale, who has an office in Austin is a staple of the cycling community here. You can’t go to a downtown restaurant, East Side bar, local swimming hole, or ride through campus without spotting a Fairdale between the legs of an excited Austin dweller. The company radiates positive vibes and makes quality bicycles.

Fenders aren’t exactly my favorite bicycle accessory. Granted I live in Texas where it “never rains” or so it didn’t really until this year. We’ve had a very wet spring and summer, resulting in a lot of unexpected rain riding. So much so that I finally broke down and decided to ditch the big, plump tread of my Bruce Gordon Rock n Roads for some fenders and the biggest tire I could find that would fit…

What do you do with that old racing frame you had for over a decade after you decide racing just isn’t for you? Or those gaudy old wheels kicking around the bike shop you’ve worked at for just as long? For Peter, one of Mellow Johnny’s longest running employees, he got crafty.

Peter has had this frame since 2003, when it was fit with an actual road group. At the time, the titanium and carbon Serotta Legend was a rocket. Stiff rear triangle, compliant front end, or so they say. Whatever the marketing behind this bike was, within its design lay a beautiful possibility.

Those bolts, holding the seat stays to the dropouts can be serviced. If they can be serviced, they can be removed so Peter took the initiative to put a Gates Carbon Belt Drive system they had at Mellow’s to the test by installing the belt through that split in the stays.

There he was, with a decade-old, balleur commuter rendered in green and gold. What else could he do to this bike to put it over the top? How about a set of gold Campagnolo wheels from 2008? Voila. Personally, I think this bike is so wacky that it works and it’s been Peter’s go-to ride for years… Run what you brung.

The Driveway Race Series takes place every Thursday during the spring and summer here in Austin, TX. It’s a super chill spin from downtown, only taking a few minutes by the new Manor trail, a paved bike path that dumps you right at the gates. As part of a review for the Fairdale Goodship, Andre and I went out to the Driveway to shoot the bike, straight from the box to the 75+ field of racers.

While I don’t normally cover criteriums, I took a few minutes to document the races before editing the photos in black and white, something I rarely do as well. The resulting images are rather nice and capture the form of criterium racing.

It really is quite the scene out there at the Driveway, so if you’re ever in town, head on over to check it out on a Thursday night.

Last week our friends at Flat Track Coffee celebrated three years of business here in Austin. Wheels of all shapes and sizes showed up to ride a janky obstacle course, drink, chat and watch the shenanigans erupt well after the sun went down. Hopefully these party vibes will inspire some similar celebrations with the Fourth of July approaching… We’ll see you on Monday!

Tools of the trade:
Leica M7
Zeiss 35mm f2
Kodak Portra 400

It’s not a cross bike, it’s a road bike with clearances for bigger tires. Sure it uses an ENVE disc cross fork, but the bottom bracket drop, chainstay length and angles are more in line with what many would categorize as a road bike. A road bike that likes to gobble up rugged and rutted roads.

The Bruce Gordon Rock n Road tires were the starting point for Ian at Icarus Frames to build Tyler his new all-road machine. He wanted hydro disc brakes and road gearing, which he may or may not swap out in the forthcoming months for a clutch and a wider range cassette. With a burnt orange paint and subtle Icarus branding on the downtube, Tyler’s bike has a confident stance without being overly gaudy. Keep it clean with the paint and get it nice and dirty…

Truth told, I’ve been wanting a bike like this for some time now and it was a pleasure being able to document it both for Icarus Frames and Tyler.

Thanks to Jonathan from Mellow Johnny’s for the build!

Austin has a certain gravity. It attracts cyclists of all-wheel types and for Matt, he wasn’t drawn here for the road cycling or mountain biking. Matt began his experience with the bicycle on a BMX. He’s from Australia and Austin has always been the mecca for BMXing in the US. His friends here range from pros to companies like T-1, where he stays while in town.

Summer Solstice on the Swift Campout with Beat the Clock in Austin
Words by Gideon Tsang, photos by Gideon Tsang and Spencer Brown

On the morning of the Summer Solstice, Beat the Clock hosted a Swift Campout in honor of the longest day of the year. We awoke to the familiar cloud cover that has come with Texas’ rainiest year on record. Swampy barely beats the scorching summer sun but beggars can’t be choosers, eh?

13 of us rolled out from Sa-Ten Coffee and Eats onto the desolate roads of central Texas towards Bastrop State Park. The protagonist of the route is Old Sayers, a 10 mile gravel road filled with rolling hills and handsome oak trees. It always feels like we’re riding into a Terrence Malick film. If the storybook setting weren’t enough, we pulled over for a nature break at a tree swing. We swung with giggles and ‘Grams.

As we arrived in Bastrop early in the afternoon, the rain gods welcomed us by opening the heavens. The remainder of the evening was spent fashioning coyote scarves, camp coffee and of course, whiskey. If all days could be spent bike camping with friends, make them days longer!

____

Follow Gideon on Instagram and follow Spencer on Instagram.

I got food poisoning. My allergies are killing me. I have a fever. It must have been the shrimp I ate. Whatever the excuse was people all over the world got sick today, calling into their jobs and taking the morning off to ride bikes. The idea is genius and also a bit sketchy. You could get fired! Or you could just spend a day on your bike instead of in an office. That was the intention anyway.

When Sean from Team Dream Team first brought up the idea of #GetSickDay – which at the time was called “fuck work day” – I thought it was brilliant. After a bunch of emails behind the scenes, he organized a bunch of group rides in cities all over the world. Portland, SF, Los Angeles, NYC, London… the list goes on and on.

I happened to be home in Austin, so I led a mixed terrain ride and Andre led a road ride, both leaving from Mellow Johnny’s downtown this morning. We rode around 40 miles after determining the original route would take even longer. Rides like this take forever and that’s the intention.

Take your time, eat tacos, drink a beer and hit a few swimming holes!

Drew from Engin Cycles is a wizard of custom mountain bike framebuilding. Over the years, he has built some of the most dialed titanium bikes I’ve seen. It doesn’t matter if it’s a rowdy hardtail with 140mm of travel up front, or a snappy, steep XC race machine to tear the field apart, what Engin offers to their customers is custom, performance machinery.

So where does a 29+ rigid mountain frame come into play? It’s not exactly performance, but it does offer up a unique problem solving opportunity. One that Drew couldn’t pass up.

Tyler’s bike utilizes Paragon’s 29+ yoke to ensure chainring and tire clearances. The rigid steel fork is painted with cerakote, as are the frame accents and Tyler chose a mix of X9 cranks, XX1 rear mech and XTR brakes, with a Stan Hugo up front and a Blunt SS on the rear. The Groovy bars really just add the icing on the cake for me.

Fatter tires at a low pressure are perfect for Austin’s Greenbelt trails, which offer a rocky, rooty and sometimes slick environment. Tyler’s been vibing with this bike all spring and is sold!

See more for yourself in the Gallery.

When South African, World Cup champion Burry Stander suffered a tragic death on a training ride in 2013, Specialized lost not only one of their riders, but one of their family members. To honor his death, they released an S-Works Epic 29r under their Specialized Projects line.

Based on their FACT World Cup geometry, this flashy frame is covered in a sparkly orange paint, adorned with African art and features a graphic inspired by the South African flag and Stander’s unique personality. The resulting product makes for an orange blur that glows in the late-afternoon sun (and is rather hard to photograph).

As far as tech is concerned, this S-Works Epic frame features a FOX/Specialized remote Mini-Brain with AUTOSAG, pushing 95mm of travel and a Rock Shox Sid Brain. Built with Sram XO1 and rolling on Roval Control SL 29 with Maxxis Ardent gumwalls set up tubeless, this thing is ready for blast off.

While I’m sure it’d take a while to truly grasp what this frame represents, Jonathan has taken quite a liking to it. All I can say is damn, look at those chain stays!

Austin has a certain magnetism when it comes to framebuilders relocating here from Boston. Icarus, Tomii Cycles and now Saila Bikes have all made Texas their new home, bringing with them their successful framebuilding practices.

Lauren Trout began working at Seven Cycles, where she cut, prepped, welded and finished frames over the course of her employment there. If you’re going to learn how to work with titanium, Seven ain’t a bad place to learn. At some point, Lauren decided it was time to work for herself and began Saila Bikes. Specializing in titanium road, track, touring and cross frames.

Saila’s shop is nestled in an industrial complex a few miles from the Radavist HQ on the East Side of Austin. Inside her roughly 600 square foot space, Lauren has set up shop over the past few months and is currently building a queue.

I swung by Saila after all the Cyclocross Nats buzz had simmered and photographed Lauren working in here space, as well as a complete cross frame. More on that to come…

Saila’s frames begin at $2,400 for titanium and $1,300 for steel. Find out more information at Saila Bikes.