The Radavist

One of the hardest things about reporting on frame builders and their shops is doing their operations justice. I’m still buzzing from my trip to Colorado to hang out with the crew at Moots and ride the Steamboat Ramble Ride. Spending a few solid days literally living amidst the operations, riding with the fabricators, talking and photographing everyone behind the scenes brought such great joy that I’m literally gushing as I write this intro. The 23 people that make this company tick are all great people who truly love their job and love cycling, at many capacities. Capturing that in photos and then writing about it is not easy!

Moots began in 1981, from the shop of Kent Eriksen, called Sore Saddle Cyclery, which technically opened in 1980, but the operations of Moots didn’t get rolling for a whole year. Kent began the brand with the help of many others, and eventually sold it off to begin his own company, Eriksen Cycles. Meanwhile, Moots began to permutate into their current state as one of the largest framebuilding operations in the USA. I can’t compare their shop to anyone else, other than Seven in the Boston-area. In terms of scale and organization.

When the Ramble Ride popped onto the horizon in my late summer travel and photo shoot plans, the guys at Moots offered up one of their prized models, the Baxter, for me to ride. Out of all their bikes in what I would consider a stout lineup, the Baxter is one that always stood out to me as the most versatile. The beauty about this bike platform is the Baxter is what you want it to be, although it’s designed to essentially be a drop bar 29’r. How you build it is up to you and there are options like with a suspension fork, or with a rigid fork, with or without a dropper post, and everything in between. Di2 or cable, double crankset or 1x, and now with the updated boosted rear spacing, compatibility with your “other” mountain bike wheelsets. The guys at Moots are great at constructing these frames, it’s just up to you to make them roll…

While in Stillwater, Oklahoma, I got the grand tour of a few of District Bicycles employees’ personal bikes. Included in this mix was Bobby’s own custom Moots Farwell 29’r. Custom in the sense that Bobby didn’t like the swoopy tubes. Luckily, he convinced the crew there to make the straightest Farwell to leave the Steamboat facility. He also didn’t want raw or bead blasted titanium.

For that, he pinged Rudy at Black Magic Paint to coat the frame with an Oklahoma Red Dirt-themed wet coat. Topping the build off with XTR Di2 and a build kit tuned for Oklahoma singletrack, this MTB actually looks damn good clean. Usually, I prefer them good’n’dirty!

____

Follow LandRun 100 on Instagram, District Bicycles on Instagram, Moots on Instagram, and Bobby on Instagram.

I love seeing Moots‘ offerings at NAHBS. They’re typically very subdued, void of ostentation and fine-tuned for whatever form of riding. So when I see Moots do something experimental, I’m intrigued. This year, they brought a dirt drop “Soft Tail Prototype” to the show and it gained a lot of attention. My favorite moment was overhearing an older gentleman explaining to a younger child who John Tomac is. Sure, bikes like this live in that magical Tomac era, and many would argue they should stay there, but part of me – the fun part of my brain anyway – really wants to see how a machine like this handles. As for the details, Moots selected the Fox AX fork, a new soft tail design with 15mm of travel in the rear wishbone seat stay and a chunkier tire up front. All it needs is a dropper post, ATMO.

Are you interested in one? Well, this is a prototype, and Moots is still trying to figure out the final detailing. If you want to email Moots, you can do so at their website.

With a road geometry, clearance for a 45mm tire, longer stays and the zippy, lightweight feel of titanium, the Routt 45 is a contender for one of my favorite, production drop bar bike on the market. Over the years, we’ve seen Moots make large leaps out of the traditional, doctor and lawyer marketplace of high-end performance road machines into more back-country oriented exploration vehicle market. That’s not a great surprise either, as even the automotive and motorcycle markets have seen a shift from speed-centered experiences to more “adventure-driven” vehicles. People want to get out more, away from the crowds and away from the confines of asphalt-driven transportation.

2017 Philly Bike Expo: Moots Mooto X RSL
Photos by Jarrod Bunk, words by John Watson

Moots is one of those brands that just oozes brand clout and rightfully so. Their titanium frames are built to the highest standards and are built to last a lifetime. The Mooto X RSL is designed with speed in mind. A true singletrack slayer, the Mooto X RSL has a modern race geometry, with the feel of titanium, designed to tackle any XC course.

At this year’s Philly Bike Expo, Moots brought their catalog build of the newest Mooto X RSL, laced with gold Tune components, matching logos and Shimano XTR Di2, this bike relies on its pedigree, in a sea of flashy show bikes.

____

Follow Jarrod on Instagram, and Moots on Instagram

Drop bars make any mountain bike hot. Now whether it’s a heat that you feel in your heart or in your stomach depends on your point of view. For Mike at Golden Saddle Cyclery, he wanted to do something new to his rigid Moots Mooto X RSL after growing tired of it with flat bars, so he converted it to a dirt drop MTB. By using a Wolf Tooth Tanpan, Mike was able to run Shimano road shifters with the MTB derailleur and cassette. That nifty piece of tech, gives you Di2 road / mountain compatibility with standard, cable-actuated shifting.

Mike’s been riding it to work at GSC, where he’s a mechanic, via the various dirt trails and roads in LA. When you think about it, a bike like this makes a lot of sense when you can ride dirt from your front door, that may not merit suspension but would benefit from a chunkier tire. Personally, I think bikes like this look damn good and are damn fun to ride.

Bobby’s Land Run 100 Moots Routt 45
Photos and words by Jarrod Bunk

Bobby knows the Gravel roads around Stillwater, when given the opportunity to make his ultimate gravel bike he chose the Moots Routt 45. This isn’t just any Routt though, this one has RSL tubing something that wasn’t an option until NAHBS this year. Other details include laser etched logos, and an engraved head tube. Bobby chose to use a Chris King 40th kit on this bike, to me something about the olive and Ti is just near perfect. The bike is outfitted with some new ENVE AR rims, Moots post, Thomson stem and a tried and true Salsa Cowbell bar. A Shimano Di2 build rounded it out with a custom machined Wolf tooth ring made to fit the new 9100 cranks.

Bobby and the crew at District Bicycles sure do know how to make one nice bike.

____

Follow Jarrod on Instagram and District Bicycles on Instagram.

This year at NAHBS, Moots debuted their Chris King collaboration color dubbed emerald. Much like its namesake, this color really pops, like a well-fertilized lawn in suburbia. Moots decided to display this new hue on their Routt RSL, built with Dura Ace.

It’s hard to photograph titanium bikes with this lighting setup, but this bike with those green components made the struggle well worth it.

Moots makes lifelong bicycles for people wanting the most precise titanium machines. While many opt for the raw titanium look, or maybe the half-painted “bragger’s triangle” scheme, other clients go completely over the top, looking to a painter to make their bike magic. This Moots client went to Black Magic Paint with a specific theme all mapped out and Rudi being Rudi made it happen…

Porcelain Rocket’s Moots Fatty with Hunter Fork
Words and photos by Morgan Taylor

Our recent trip through the Rockies to visit Porcelain Rocket’s shop was months in the making. The plan was to start with the shop visit in Calgary and then backtrack for a ride with Kevin Tweed in Banff the following day. I was excited to experience first hand the majestic Canadian Rockies, and to ride with Kevin on his home turf – but we were skunked.

In the days approaching our visit, massive wildfires burning south of the border combined with stagnant weather patterns to send a blanket of smoke over much of southern BC and Alberta. I had imagined shooting Scott’s Moots with a breathtaking Banff backdrop that I knew Kevin could lead us to, but that idea was out the window. Fortunately, Scott’s Moots holds its own. The haze lifted just enough to let an orange sun bring out the depth in the titanium, and we made some magic.

Moots have been making moves over the past year to redefine some of their lineup. Their Psychlo X got an overhaul and inspired the Routt, which then spawned the Routt 45 and while that might be exactly what you want, or need, they also offer custom designs.

This all-road is one of those custom designs and it features one hell of a build kit. That super tricked out ENVE GRD fork made its first appearance on this bike, as well as those new 12mm thru-axle King hubs (more to come on those). One other detail worth noting is the prototype ENVE seat post, with a double clamp mechanism – a vast improvement over the current design.

Overall, this was my favorite titanium bike at the show because it not only looks capable, it looks confident.

Shouts to Mike Cherney for making every. single. one. of those Moots head badges by hand!