The Radavist

According to the internet, The Beatles’ song “Yesterday” has been covered between 1,200 and 3,000 times, which even on the low end of that range makes it the most covered song in history. The spare lyrics, describing the ever-relatable ache of lost love, and string arrangement make it a simple yet sophisticated work that has managed to transcend the six decades since Paul McCartney first dreamed (literally) up the melody. The uncluttered elegance has rendered “Yesterday” truly timeless.

While first unveiled in 1994—incidentally, the same year that both LeAnn Rimes and Boyz II Men covered the McCartney classic—Merlin’s cruiser-inspired mountain bike, the Newsboy, has also reappeared in various forms throughout the intervening years. Like McCartney’s paired down lines, the Newsboy shares an on-the-surface simplicity and a nostalgia-driven design that has contributed to its lasting appeal. Merlin has just launched its latest Newsboy redesign, let’s take a look below…

While the 2023 Enve Grodeo was chock-full of some of the snazziest bespoke all-road bikes from around the world, Spencer Harding’s eye was caught by an eccentric build noticeably absent from the show floor. Fortunately, he was able to get the bike’s owner, Clint, to stop throwing skids long enough to snag a closeup. Pulling influence from some strange corners of the bike world and outfitting the frame with some amazing and unique parts, Clint’s SaltAir stood out for more reasons than its single rear cog. Clint rode this pink dream on all 92 miles of the Enve Grodeo, a feat in itself regardless of it being a fixed gear 26-er. Let’s have a closer look!  

In a strip mall on the north side of Tucson, a small business space houses Moon Dust Apparel (formerly Handlebar Mustache) and Cycle Monkey. One of these you have heard of if you like sweet socks, the other if you are an internally geared hub nerd. Today we highlight these two neighboring businesses you may not have known are now down in Tucson.

Spencer and I have been riding bikes together for 15 years. Since then, Spencer developed a career building and repairing guitars in Nashville, Tennessee. Back when we were younger, we spent a lot of time hanging around our local bike shop,  Halcyon, and working on our bikes on their community stands. His bikes are deeply practical, very unique, and kind of clapped out. I’m not here to tell anyone what to do, but I wish more people built and rode bikes like Spencer. Recently I went to Nashville, and I took some time to document his bikes and ask him a few questions about his builds. Below, let’s check out what he had to say…

Today we are back with part two of Spencer Harding‘s ENVE Grodeo and Builder Round-up coverage. If you missed the builds featured in yesterday’s post, we’d recommend going back and giving them a gander—3D-printed parts (most ti but some steel, too!) seems to be the unofficial theme for the year but there’s plenty to see across the creative spectrum! Today, we finish up with the remaining frame builders in the showcase—with a few more overseas features—then we head out on the weekend’s main event, a 92-mile gravel ride on some of the best dirt in the northern Wasatch Mountains. Let’s dive in!  

We’re not in Kansas anymore. Certainly not. Unlike the hard bedrock of the flint hills and similar gravel roads that pattern the Midwest, The Mid South (or “Mud South”) hosted in Stillwater, Oklahoma is characterized by its rich red clay. Second only to race director Bobby Wintle‘s finish line hug for every rider, The Mid South has become infamous for its often wet weather that turns that beautiful red clay into drivetrain-eating mud. Re-routing the course is never even a topic of conversation.

Geographic locations and riding can add a lot to the picture when considering what your dream bike may be. Massive tire clearance? Tall or low bottom bracket? Slack or steep head tube angles. Well after riding in an area for so long you figure out what works, what doesn’t, and what you wish someone could just get right. With these thoughts in mind Bobby collaborated with Wilde Bikes to develop a bike that is Mid South approved. How so? Read on to find out a little bit more about this bike from Jarrod Bunk and check out some flicks on the red dirt.

Taylor‘s journey to rediscovering a love for bicycles included building a modern klunker from a 1954 Schwinn Hornet frameset. After plenty of experimentation with parts and modifications, an unlikely entry into a local race would prove fortuitous for Taylor and his vintage rig. Continue reading below for a detailed rundown of Taylor’s build project, racing his klunker at local events, and more from Skidway Island!

Argonaut’s GR3 gravel bike combines the trademarked GravelFirst geometry with a custom rider-specific carbon layup to create what the Bend, Oregon-based frame and component builder claim to be a “rip-capable gravel bike unlike any other.” So, what does Petor Georgallou‘s time as a high schooler working at a video rental shop have to do with the Argonaut GR3? And, if he tells you he likes the bike, will you even believe him? Read on to find out…

Every bicycle has a story behind it, especially those that are dreamt up over a period of years and eventually brought to life and built from the ground up. This absolutely stunning titanium Black Sheep ‘Speedster’ fat bike is definitely no exception. One could argue it’s a bit of a stretch, but in this case, this bike’s story involves skateboarding and a decades-long journey from the east coast to the west coast, and finally the southwest.

While steel full-suspension bikes are nothing new, there has been a resurgence in recent years with many small framebuilders making trail-ready, competent bikes that leave their genetic predecessors in the proverbial dust. When I first rode a Starling Murmur in 2019, I wasn’t prepared for how engaged I felt with the trail or the flex and movement the Murmur provided. If you like the feel of steel hardtails or gravel bikes, chances are you’ll vibe more with a steel full-suspension than a carbon model.

These bikes are incredibly niche (though you can find them being made in workshops worldwide), and they still feel like a product from a cottage industry, not an engineered machine. It wasn’t until I spent some time with the REEB Cycles SST that I felt like steel full suspension bikes had finally leaped into the next stage of their evolutionary process. Let’s take a look at the SST below.