The Radavist

I remember this day like it was yesterday. I had a big meltdown, mentally I was not in the right place. I had spent all day at home and there was only a short amount of time that the government was allowing us to leave the house for sports activities in the afternoon.

It was the 4th of May 2020. I planned a route very meticulously as I wanted to get the best views of the sunset. So, I packed some of my bags and of course remembered a hip bag with my camera and a few lenses, got my MTB ready, checked it and put some oil on the chain, removed the front wheel so it would fit in the elevator, and opened the door to a new adventure…

Since moving to Santa Fe, I’ve ridden my mountain bikes almost exclusively, which is a stark contrast to how much time I would spend on my drop bar bikes in Los Angeles. It’s not that there isn’t gravel in our area, it’s just that mountain biking is so accessible, so remote, and so sheltered from the wind and the sun, it’s a no-brainer.

Another major difference is whereas I’d drive to the trailhead in LA, I find myself riding to the trails here 99.9% of the time, even on my Starling Cycles Murmur, which is a really big bike to pedal across town, up the foothills, and into the mountains.

These miles spent on my full suspension had me spending a lot of time adjusting the coil system this bike was built on. Some days, I’d pedal with only a hip bag, while others, I’d lug a heavy camera bag around. This 10+ pound differential made it somewhat awkward to adjust the coil shocks as I found myself smack dab in the middle of the two coil weight zones. While the ride quality of the coil system is undeniably noticeable, it felt like I needed something less finicky.

So, when Fox reached out, asking if I wanted to try out their new fork and rear shock, I jumped on the opportunity. Little did I know I’d gravitate back towards air after vibing so hard on the coil shocks’ ride quality…

My first taste of full suspension came when I was working as a wrench at a shop in Quakertown PA just after graduating from college and not really having a plan. On mornings off, I’d take out a demo and ride the local trails up on South Mountain in Emmaus. Those bikes were terrible. But at the time, I was young and loving any bicycle I could get my hands on. That was 1998. A degree project when I went back to school confirmed I didn’t have a clue about geometry, handling, let alone suspension kinematics. Fast forward to 2012 when I hung my shingle out starting 44 Bikes, I became solely focused on honing geometry and understanding fit. But deep down, I wanted to build a full suspension bike but I knew I wasn’t ready. Which brings us to the here and now. Things began to click after building hundreds of bikes and dozens of prototypes where I finally felt like I had a grip on geometry and handling. I wanted a new challenge. So in the Spring of 2019, I started acquainting myself with a platform I had largely ignored.

We previously featured Chris’ Caletti but he shot some updated photos of it in very eerie light cast due to the fires in California. We’re running this updated gallery with words by Chris himself below…

The constant evolution of mountain bike technology over the past few years has been relentless. Mixed in with the breakneck progression comes fierce competition between the two powerhouses of component manufacturing; SRAM and Shimano. While Shimano was arguably a bit late to the 1x game when compared to SRAM’s early adoption of this technology, over the past few years they’ve proven they’re taking it seriously and have completely revamped one of their most beloved groups, Deore with trickle-down tech normally only found on the higher-priced tiers. I’ve been riding the entire M6100 kit for the past four months here in Santa Fe on my Mystic hardtail and I’m ready to talk about it, so let’s drop right in…

We’re big into hardtails here at the Radavist. While my personal bikes are all steel, riding carbon bikes can be a real treat, especially when the company has put so much thought into the design.

Yeti has a long history of designing capable and attractive bikes. The original ARC was a collaboration with Easton and the intent was to make a truly lightweight machine in that era. The OG ARC’s aluminum frameset weighed a mere 3.2lbs, which was a groundbreaking accomplishment for 1991 and those bikes are still iconic, even today.

You could say Yeti had a lot riding on this new ARC design and there were a few decisions that set this new model on a different trajectory from its predecessor. After riding this bike for a month here in Santa Fe, I’ve finally wrapped my head around how to review it, pointing out its accomplishments and my own personal critiques of this entirely new model, so read on for more…

Back in 2016, at the end of the #dflthedivide trip, there was a great little 40th-anniversary party at FreeCycles in Missoula to celebrate Adventure Cycling turning 40. At this party, there was a real nifty bikepacking rig from a small company that was right at home in a nonprofit shop. The Advocate Cycles Hayduke. Now, Advocate has transformed into Esker Cycles, and though the road and touring frames are no more, Hayduke Lives! (on). These are my impressions of this nifty hardtail.