The Radavist

Singlespeeds and Sunburn in the Lost and Found Race
Words and photos by Kyle Kelley

It’s not too often you get asked to hop in a car and drive 8 hours north, race (I didn’t do much racing though) a 100 mile “Gravel” Race with 7,000 feet of elevation on a Single Speed, then hop back in the car and drive another 8 hours home. So of course I said “Yes!”

While I said yes, I must admit I was kind of worried. I’d agreed to do something I really knew nothing about. I’m not in the best shape at the moment, definitely not in 100 mile Single Speed shape. This is kinda like hiking 16 miles round trip to Half Dome in brand new boots, which I’ve also done. I never said I made the best decisions, but luckily I’m still having fun and the 2015 Lost and Found Gravel Grinder was no exception!

One of my favorite trails in Los Angeles recently became the backdrop to a photoshoot for a brand that I’m very excited about. Ringtail is a new company, started by Sean Talkington from Team Dream and Kyle Kelley from Golden Saddle Cyclery. Their intent is to make great fitting, practical cycling apparel and accessories in the USA. As of now, everything is made in the Los Angeles area, which is an added plus for the dudes, seeing as though they like being a part in the production process.

It’s not everyday that you see a cyclocross bike with Campagnolo Chorus 11 speed. I suppose it’s not too common to see a Geoff McFetridge-designed bike either, unless you’re in Los Angeles, which is Mudfoot territory.

Jason, like a lot of us, likes to use his cyclocross bike for road rides, dirt rides, trail rides and even a bit of ‘cross racing. These days, he’s got road wheels on his bike for heading into the hills and mountains surrounding LA. Yesterday, he took a leisurely spin up Griffith Park en route to getting a bite to eat.

I’ve seen countless Stinner Frameworks x Mudfoot bikes, but his was set up differently than others. Things I like about this bike: the white housing, GSC Steal Your Shop stem cap, the Prologo saddle, juxtaposed by the white bar tape. Things I don’t like about this bike: that it’s not dirty enough! Get out and ride that damn thing more Jason…

You can never have too many tools for the same job. In Paul Price’s case, a cyclocross bike. Over the years he’s collected quite the stable, from various frame builders throughout California. We already looked at his Black Cat monster cross and now we get to check out some details of his Rock Lobster SSCX. As with the Black Cat, you can see just how sated this steed is based on the component and frame wear alone.

With technology changing, PAUL making disc brakes and everything going oversized or tapered, there’s something elegant about a rim brake ‘cross bike with a steel fork. Especially from a man like Paul Sadoff.

Shred on man, shred on…

For over 25 years Chico, California has been the home base for Paul Component Engineering. During the Speedvagen Fit Tour we swung by to check in on their operations and to get a sense of what the team, the city of Chico and Paul Price himself are all about…

When Paul Component owner Paul Price started to “make it big” he told himself that he wanted to order a bike each year from a NorCal frame builder. Retrotec, Rock Lobster, Sycip, etc, etc. At the time there were a handful of builders and for a few years he kept to his yearly deposit.

Then he got busy, the framebuilding industry grew and technology changed. For a few years he focused on the company and put his frame builder promise on hold. He then came back around to his promise and at the Sacramento NAHBS, picked up this Black Cat monster cross from Todd. Soon it became his staple bike. Like many custom frames, Paul had an idea for this bike that surrounded a specific component or part.

Those Panaracer Fire Cross tires are awesome, but they won’t fit on most production bikes, or even most custom bikes. 45mm is a lot of rubber for a cyclocross bike, and Paul knew that so he asked Todd to build him a bike around those tires. The end result is really incredible.

The beausage on the cranks alone are worth a photo. Luckily, I shot the whole bike too…

October will be here before you know it and with it, comes Grinduro, a different kind of bike race. After my pre-ride photoshoot, one thing became evident: the best rig for this race is a cross bike. Don’t even try to ride a road bike, because you’ll be walking and if you ride a MTB, you might clock in a better time on the descents, but there’s a 25 mile climb.

When Giro announced the Grinduro, Santa Cruz framebuilder John Caletti of Caletti Cycles began working on a cyclocross bike for the event. With bent seat stays, clearances for a 40mm tire, disc brakes and no-rattle housing, this bike is the ideal weapon for a day filled with Sierra Nevada gravel and crag.

My favorite detail on this frame in particular however is the Geoff McFetridge artwork. The evil mountain awaits and Grinduro is coming… Best get your rig ready.

To commemorate their new ultralight Addict cyclocross bike, Scott Sports had Marcel Wildhaber’s special edition bike on display at their Sea Otter Classic booth. While the production Addict touts the same frame details, the paint job on this one was too good to pass up on… more. camo.

The Addict CX is being marketed as one of the lightest framesets on the market. Weighing in at a cool 1300g (frame and fork), it’s a claim that’s easily backed up. With internal routing for everything, including a dropper post, thru-axles and a removable front derailleur clamp, the Addict CX’s minimal profile is both appealing to those obsessive mechanics, as it is to racers.

While the production Addict comes with clinchers, Marcel’s bike had some juicy FMB tubies glued up, providing that last little bit of flair to an already sick race machine. There’s more information to come on the Addict CX at Scott Sports and more photos in the Gallery!

Since the beginning, Rick at D&D Cycles has painted the Ritchey frames that found their way to him, including the popular Commando mountain bikes. This irregular pattern was something that the Ritchey factory overseas couldn’t emulate, so the team brought this new Swiss Cross straight to D&D Cycles for the appropriate treatment.

For 2015, Ritchey will now offer up any steel frameset with this paint option. It doesn’t matter if you’ve got an older Swiss Cross or a new Break-away, any of their steel frames can be painted like the old Commandos. Simply contact them for more information.

See more photos of this beaut in the Gallery.

When you ride a 44cm cyclocross bike, there aren’t many options out there. In fact, a lot of riders will opt for a 26″ mountain frame, which limits tire selections for ‘cross. For Lori, she wanted a cyclocross frame that would fit a fat tire and most importantly, fit her, while keeping true to the 700c wheel.

Builder Nao Tomii of Tomii Cycles wanted to take advantage of the extreme sloping top tube by making this cross bike look like a drop bar 29r mountain bike. Since a lot of people prefer their cross frames a bit smaller than their road frames, this one comes in a tad under 44cm. With 150mm Rotor cranks and Shimano Ultegra hydro disc brakes, Lori has absolute control over her bike. In fact, she’s already started riding trails on it here in Austin.

Personally, this is where custom frames triumph and when they look this good, who can argue with that? Check out this testimonial on Lori’s Instagram account.

Props to the mechanics at Mellow Johnny’s for building such a stellar rig for Lori and a huge high five goes to Nao at Tomii Cycles for building such a rad frame.

Ian Stowe is a shredmeister. A true Radavist. He races cross for Rock Lobster, works for Santa Cruz Bicycles and spends some time as a model for Giro (that’s him at the top of the site). This past weekend, while on a super super secret outing, I got to spend a lot of time in the saddle with the dude (Like, 25 miles of high Sierra uphill saddle time) and a lot of time looking at this stunning Rock Lobster disc cross bike.

I don’t know what’s better, the bike by itself, or the complete package, paired with those House Industries bidons… At any rate, check out more photos in the Gallery and stay tuned for more information on our outing last weekend.