The Radavist

With a road geometry, clearance for a 45mm tire, longer stays and the zippy, lightweight feel of titanium, the Routt 45 is a contender for one of my favorite, production drop bar bike on the market. Over the years, we’ve seen Moots make large leaps out of the traditional, doctor and lawyer marketplace of high-end performance road machines into more back-country oriented exploration vehicle market. That’s not a great surprise either, as even the automotive and motorcycle markets have seen a shift from speed-centered experiences to more “adventure-driven” vehicles. People want to get out more, away from the crowds and away from the confines of asphalt-driven transportation.

Is it one’s riding that evolves first? Or is it the bike that is the catalyst for evolution? Bicycle design, much like one’s riding style, evolves over time, triggered by a series of environmental or equipment changes. Perhaps your everyday singletrack just gets tiresome and you’re looking for a way to change it up, or maybe your road bike gathers dust during ‘cross season. At some point, riders look for excuses to shake things up, as a break from the painful monotony of riding bikes by the rules and luckily for us, the offerings from companies follow suit, evolving their lineup in the same sequence.

A number of brands have taken a look at their ‘cross bikes and asked what the next step in evolution would be, or perhaps, what it should be. What seems like ages ago, we were all riding singletrack and fire roads on 32mm tires, burnin’ brake pads as our cantilever or v-brakes smoked our sidewalls. Then came disc brakes, which offered more control, options for larger tires and other benefits. All the while, frame builders were experimenting with multiple wheel size options, brought along by the popularity of disc brakes. Soon 27.5″ (650b) wheels began popping up on drop bar ‘cross bikes, yet these weren’t really “cross” bikes anymore. They had evolved past that.

Ibis recently took a long hard look at their classic ‘cross frame, the Hakkalügi. These frames started out as steel, cantilever bikes, marked by classic Ibis stylings and most notably, the Mike Cherney fabricated “hand job” cable hanger. Like Ibis’ mountain bikes, once carbon fiber became the preferred material, the Hakkalügi went through the motions, too. Carbon canti, then carbon disc but the whole time, these bikes stayed true to classic ‘cross frame tire clearances and geometries, always feeling like outliers in the brand’s catalog. Ibis knew it was time for a change.

A Matte Sand Breadwinner G-Road at Grinduro
Photos by Kyle Kelley, words by John Watson

For Grinduro this year, many framebuilders brought their baddest rigs out to get coated in the infamous Quincy dust. In the mix was Breadwinner Cycles from Portland and in tow was this very special version of the Limited Edtion G-Road, painted in Matte Sand and built with an emphasis on made in the USA componentry. This includes a kit based around the 27.5″ wheel and tire platform, perfect for packin’ in plenty of rubber to absorb the rough and rocky terrain, while relying on Chris King for the BB, HS and hubs, White Industries G30 Cranks, Velocity Cliffhanger rims in 27.5″, Thomson stem and seatpost, Paul Klamper brakes, Silca Impero Frame Pump and last but not least, trusty King Cages. Top off this stellar build with an Igleheart fork with cargo cage mounts and you’ve got one trusty and capable shred sled.

Bikes that look this good need very little introduction and at this point, everything Breadwinner has been putting out over the past few years has been enticingly shreddy! If you’re interested in one, holler at Breadwinner!

____

Follow Kyle on Instagram and Breadwinner Cycles on Instagram and look for more Grinduro coverage coming next week!

Two purple bikes back to back? It must be Grinduro…

Some people have been wanting eTap WiFli hydro and for those people, the wait is over. SRAM announced eTap WiFLi hydro groupset this morning. Coincidentally, the group appeared on this flashy Stinner all-road, which is on display at Grinduro in Quincy, California starting today. The paint uses a subtle fleck, akin to what you’d find in finger nail polish that sparkles in the sun, yet is hardly noticeable in the shade. For those wanting specs on the SRAM group, eTap WiFLi weighs 243 grams with battery and will take up to a 32t cassette. Combined with a titanium tig welded frame made from Stinner select tubing and you’re looking at a light machine, perfect for Grinduro’s challenging course.

The Specialized Sequoia was first designed by Tim Neenan in the early 1980’s. Later, Jim Merz improved upon the design of this versatile bicycle. While the 1980’s steel Sequoia had a certain panache, the aluminum models of the 2000’s somehow lost their sex appeal. Maybe it was the industry at the time, or maybe it was the “hybrid-looking” silhouette of the bike, but whatever the reason, the Sequoia died out in the 2000’s. In its time however, the steel Sequoia from the 1980’s received a cult-like following.

“In the early 2000’s, Bicycling Magazine asked several industry luminaries what they thought the best bike ever built was. Grant Petersen, founder of Rivendell Bicycles, nominated the 1983 Specialized Sequoia.” Adventure Cycling, August 2003.

Fast forward to modern times. The cycling industry is enamored with the outdoors. Bikepacking, touring, bicycle camping and S24 rides are all the rage. Hell, even Adventure Cycling is celebrating the Bikecentennial this year! All the brands have taken a stab at designing the best-suited bike for the aforementioned activities. While Specialized wasn’t by any means the first to the party in terms of “adventure bicycles,” they have staked their claim to the movement.

This bike, upon first glance, might just seem like a cross bike with some flashy paint and while that is mostly true, the thing that struck me the most about Parker’s A-Train all road is the drivetrain. Well, the drivetrain and that killer paint!

Knowing that he wanted to ride this bike on more dirt than sealed road and being a fan of Shimano, Parker mixed his Di2 with XTR and Dura Ace, relying on not only the clutch of the XTR rear mech, but its cage length, allowing him to wrap a big cassette around his chain. You don’t see this a whole lot, but it makes total sense, especially if you like the idea of SRAM’s 1x system but the feel or ergonomics of Shimano. Is it working out for Parker? You bet. While he was visiting Los Angeles from Minneapolis, where he works at Angry Catfish, he took full advantage of steep frontage and fire roads…

Taking a more “mountain bike” approach to fitting in terms of reach and fit has been a successful design characteristic of bikes like the AWOL. Shorter stems mean the top tube can be longer, giving the rider less overlap and the sensation of sitting “in” the bike, rather than “on” it. When Peter first contacted Geekhouse, he wanted a straight up ‘cross bike. Then he talked to a few people and he realized he wouldn’t be racing a whole lot. Rather, he wanted to take this bike up into the mountains of Los Angeles and disappear for hours on end. The triangle would be big to fit a frame bag and the bottom bracket a little lower to make it more predictable on descents.

It’s funny how the desire for a custom race bike is quickly quelled by the necessity for a vehicle to inspire escapism.

Fast forward to the bike’s completion. It just took a leap across the country to follow its owner as he relocated from Los Angeles to Austin, Texas. Essentially he and I swapped places… His relocation came at such a moment that the frame was shipped to Los Angeles first, before being packed back up and delivered to Mellow Johnny’s, where I photographed it this afternoon on a brief visit.

It’s great seeing a bike like this alive and well in a new and exciting city for its owner to explore. Enjoy this thing, Peter!

When in Berlin, photograph German frame builders, right? Troica Cycles is a Berlin-based builder, specializing in tig-welded, steel cyclocross and road bikes. While their website’s offerings look beautiful, Florian‘s bike is a little different. This all-road, light tourer, randonneur, or what have you, features a beautiful segmented fork with a custom rack to boot. Its paint job is accented by the sour apple Chris King, ENVE M50 wheels and a bright turquoise Chris King headset. This bike is colorful, yet subdued at the same time…

Today I got to spend four hours with Florian and his Troica, admiring its subtle style and capabilities. Check out more for yourself in the Gallery!

Over the years, NAHBS has become the launching platform for companies to release new products, utilizing custom frames as the backdrop. One of those new projects are the WTB Road Plus wheels and tires, finding themselves on this Hunter Cycles Disc All Road.

The concept is simple. Generally speaking, a 47mm 650b wheel has the diameter as 700 x 30mm tire. The tire they’re using for this system is the new Horizon Road Plus Tire. These new tires accompany WTB’s new 650b disc wheels.

Back to the bike. This Hunter Cycles really pops, with a wishbone rear, Shimano flat mount disc mount design and that elegant fork crown. The build is topped off with Praxis cranks and Sim Works cockpit. Enjou!

What’s this? Rim brakes? Yep. Steve Rex‘s submission to the Grinduro expo was the only bike that used traditional rim brakes and you know what? I like that. A lot. Especially when it comes to the stopping power of PAUL Minimotos. Steve chose White Industries T11 hubs to Pacenti rims, SRAM CX1 and even had some slick pinstriping added to the otherwise sleek and minimal frameset.

Void of ostentation, classic, timeless and ready to rip. Rex surely is king here…

Remember this one? From NAHBS? It was one of my favorites in the show. Everything about it just looked right. First impressions are everything you see and these days, with the whole bigger is better mentality about tire clearances, it was nice to see something embrace a modest tire so elegantly.

Mosaic‘s GS1 disc all-road bike is a custom steel or titanium frameset, offered by the Colorado-based frame builders.

Let me reiterate that: this is not a production model with stock sizing. It’s made with 100% custom geometry. A custom geometry ensures this bike will fit you like a tailored suit.

The GS1 is a road bike with disc brakes and room for around a 38mm tire. It has a road bottom-bracket drop (72.5mm) and a slightly slacker head tube than your average road frame (72.5º). Side note: I like how those two numbers match up so perfectly. The 420mm stays and 1033.5mm wheelbase can be best interpreted as smooth sailin’ down your favorite road, be it dirt or sealed.

Blue Collar Bicycles‘ Robert Ives knows a thing or two about metal. Both the tig-welded and guitar-wielded variety. For Grinduro, Giro’s Eric Richter commissioned both Robert and Paul Price of Paul Component Engineering to assemble a sparkle blue disc all road.

This bike stole the attention span of Grinduro Expo attendees with its intense finish and array of orange anodized Paul components, topped off with SRAM’s 1x technology… All hail the trail Eric and Robert. All hail. Take that puppy to dirt church already!

Cycling is an experience that should continue to mature overtime. I’m weary of people who stand firm in their ideologies, rest on laurels and refuse to embrace the “new,” especially when it comes to riding bikes. Look, it’s not that hard to have fun. Opinions can change with experience, its normal. Embrace it.

For the past two years, I’ve been planning both financially and functionally for this bike. Something I’d encourage everyone to do with a custom machine. Don’t just jump in head first without doing research and saving your money. The last thing you want to do is to take a financial hit once the final invoice comes in.

You see, I knew I wanted a Firefly. I kind of felt like that brand and my own brand have grown together over the years. When Jamie, Tyler and Kevin started the company, it had a breath of energy, creativity and their final products all expressed experimentation. Those guys can make anyone a dream bike but deciding what kind of bike is a challenge. Part of my apprehension was not only where I felt like cycling’s technology was heading, but where my own riding would be taking me over the next few years.