The Radavist

Over the years, I’ve had the ability and privilege of throwing my leg over a number of fat tire, drop bar touring bikes. From the almighty Tumbleweed Stargazer to the readily available Kona Sutra ULTD, these robust bikes with an off-road and load-bearing geometry make for great interstitial, genre-bending machines for all sorts of riding.

Yet before brands like Salsa were even making high clearance, drop bar, 29er, disc brake, production touring bikes, a brand called Singular Cycles in the UK shifted the paradigm with its Swift in 2007 and, later in 2008, Gryphon models. These frames featured high stack numbers, fit big tires, and most importantly, had rack/fender/cargo bosses aplenty.

This year, Singular debuted its custom Gryphon Titanium, and once again, I’m questioning which bike to crown “best in class.” Check out my full-length review below…

Will Bender is a bicycle frame builder based in Fort Collins, CO. His custom frames run the gamut from all-road to gravel, touring, and modern hardtails. Last summer, Josh paid Will a visit to document his shop and learn about his background and approach to building bikes. While he was there, he enlisted Will to build the touring MTB of his dreams — a comfortable 29+ rig capable of carrying heavy loads and designed to harmonize with the Oddity Squid Fork made concurrently by another Fort Collins frame builder, Sean Burns. Continue reading below for the full rundown on this build…

These days, it’s hard to set your bike brand apart from others within a specific niche but if there’s one thing Cjell has achieved with his brand, Moné Bikes, it’s just that. Moné frames are instantly recognizable with their large, bountiful brass beds of fillet brazing, unique tubing bends, intricate and ingenious singlespeed-friendly dropout designs, and yeah, rat rod aesthetics. Cjell and I have met before, albeit briefly, but at last weekend’s Dangerbird event, we got to spend a lot of time on the bike with each other, which helped me gain an even deeper appreciation for the brand, the bikes, and the man who designs and even builds some of them.

Santa Fe has long been a hub for travelers and this year, we’ve seen a good amount of cyclists roll through town while on their vacations and holidays. Most people just want to go out for a pedal and some bring a special bike. Simon is the latter, bringing along with him a really beautiful titanium 29+ rigid MTB, built by a company with a small internet presence called Haley Cycles. Let’s take a look at this beaut below.

With the snow melting and the season ripe for desert ramblings, Kyle Klain took his 2016 NAHBS-built Sklar fatbike and converted it to 29+. After spending all winter with fatbike 26+ tires, the bike has undergone quite the transformation. This weekend while celebrating my 40th birthday in Southeastern Utah, I documented this stunning build in the morning sun. Check it out in detail below…

A bike can be a liberating tool for a youngster. I got the first bike that I could travel distances on when I was 14. Granted it was a beach cruiser but hey, we lived at the beach. I’d carry my skateboard and even a surfboard to spots after school and on the weekends. It was a vessel of adolescent liberation.

For Jonah, a local of Santa Fe, and an employee at Mellow Velo, the bicycle has helped develop his independence as well as a vehicle to meander around his homeland. His family is one of the deeply embedded heritage households and have been in the area for hundreds of years. Just north of Santa Fe is the town of Chimayo where his family has been weaving for generations under the brand Ortega.

This year at Grinduro, eight frame builders presented bikes in partnership with Maxxis, Sram/Zipp, Columbus, and Hope Tech. The theme? What is your ideal Grinduro bike? For each gravel bike in the morning, we’ll present a mountain bike in the afternoon. This round, we’re matching the BTCHN’ gravel bike with this Sklar Rigid 29+.

As the lead designer at Landyachtz Bikes, George Bailey sees his ideas come to life through the company’s made-in-Vancouver custom steel frames as well as their factory production models. Yet even those whose ideas regularly come to fruition have their dreams, and that’s exactly what George’s titanium drop bar 29+ is. No holding back, just setting every detail where he wanted it, and creating a one-off frame with a very long ride in mind.

Before we jump into the world of Retrotec Bikes and Curtis Inglis, let’s look at one of Curtis’ personal rigs; this 29+ rigid mountain bike, what I like to call the “Trail Cruiser.” Now, calling this a cruiser has nothing to do with the speed at which Curtis rides trails while on this rig and has everything to do with the history of Retrotec; a company that began modifying actual cruisers into off-road machines.

Drew from Engin Cycles is a wizard of custom mountain bike framebuilding. Over the years, he has built some of the most dialed titanium bikes I’ve seen. It doesn’t matter if it’s a rowdy hardtail with 140mm of travel up front, or a snappy, steep XC race machine to tear the field apart, what Engin offers to their customers is custom, performance machinery.

So where does a 29+ rigid mountain frame come into play? It’s not exactly performance, but it does offer up a unique problem solving opportunity. One that Drew couldn’t pass up.

Tyler’s bike utilizes Paragon’s 29+ yoke to ensure chainring and tire clearances. The rigid steel fork is painted with cerakote, as are the frame accents and Tyler chose a mix of X9 cranks, XX1 rear mech and XTR brakes, with a Stan Hugo up front and a Blunt SS on the rear. The Groovy bars really just add the icing on the cake for me.

Fatter tires at a low pressure are perfect for Austin’s Greenbelt trails, which offer a rocky, rooty and sometimes slick environment. Tyler’s been vibing with this bike all spring and is sold!

See more for yourself in the Gallery.