The Radavist

Curiosity. It’s a great trait to have as a cycling journalist. An inquisitive nature is what first prompted me to throw a leg around subculture-spawned bikes, like steel full-suspension 29ers and titanium hardtails, years ago. Sometimes, you have to pedal something for an extended period to whet that appetite for the occasional oddity that arises. If you’re lucky, those experiences challenge your preconceptions, too.

Working in bike media, it’s pretty easy to get cynical about all the marketing hype and the constant push for model years by the bigger brands, particularly regarding ever-changing drivetrain technologies, incremental gains, and complex suspension designs. I still value riding a rigid 29er as much as riding a vintage 26″ wheeled steel chariot through compromising terrain: the almighty underbiking ride keeps you honest, allows for honing your skillset, and can be damn fun.

Yet, on the flip side, I am attracted to high-tech, modern carbon bikes in small doses. Hence the allure of this Yeti SB135.

Before testing out the SB135, it had been a while since I’d ridden a carbon full suspension as, in the intervening years, I’ve been enjoying sampling the steel offerings out there from smaller, bespoke builders. Yet, the appeal of the high-tech is palpable—lighter, faster, smoother-shifting sounds fun, right? Mix in Yeti’s 27.5″ platform for the SB135, and my curiosity was piqued. The last 27.5″ wheeled bike I reviewed was the Santa Cruz 5010 and the previous 27.5″ wheeled bike I’d ridden was the Transition Scout that was loaned to me for a Moab trip. It was on that very trip I realized that while I admired the 27.5″ wheel platform, it wasn’t necessarily for me nor for the terrain I enjoy riding.

Yet, the SB135 was just strange enough, foreign enough, new-and-techy enough to have me put my steel sled with cable-actuated shifting aside for a few weeks and spend some time riding Yeti Turq and SRAM T-Type shifting…

Following the review of his MASH SF Steel All-Road from earlier this year, Chris Corona is back with yet another MASH bike review. This time, he’s built himself a steel “Rockbanger” 27.5 hardtail mountain bike and documents it in his stunning photographic style. Let’s check it out in detail below!

Good ol’ Ronnie. How many bikes have we shot together now? It all started with a chance encounter in Austin in 2014 when I documented his Trek 970. Back then, he was known as Benedict and dressed in his post-Wooly Mammoth roadie persona; lumberjack meets blast beats, sprinkled with some Tolkien lore and usually seen astride either a vintage MTB or a Rivendell, dribbling olive oil on his vintage Suntour components. This was early Ultraromance—the genesis of his persona—when he had just begun to crack open the internet with his wild style and über cøøl bikes. I love this man, no matter what name he festoons his internet crown with. Always have. Always will.

Fast forward to the 2022 Philly Bike Expo, where I recently met this gentle yet patinated gent once again to document a bike that picks up where our Duralcan post left off.

The Alumalith is the latest model to be released from the Ron’s Bikes x Crust Bikes cache and the first US-made aluminum bike he’s designed, with Frank the Welder at the helm, speccing tubing diameters and laying down iconic beads on brushed, raw aluminum. Let’s check it out below!

Earlier this year, Locke Hassett had the pleasure of spending a few months riding Breadwinner Cycle’s Bad Otis. This modern 27.5-inch wheel hardtail – with snappy short 415mm chainstays, 66° headtube angle, and 160mm of front suspension – presented him with some interesting considerations about mountain bikes, the sport as a whole, and what it means to him. Continue reading below for Locke’s in-depth review of the Bad Otis, along with some other relevant revelations…

What will soon be seven summers ago, Crust Bikes CEO Matt pedaled his prototype Evasion to the end of Long Island to catch a ferry across the Sound to where the fishing boat I was working on docked each evening. I readied the lines as the boat backed into the harbor.  Looking up, I could see a backlit figure of a cyclist above the docks in the parking lot— late summer setting sun illuminating orange and golds through course, untamed hair.  Chest hair.  We had been expecting each other…

For as long as I can remember I have wanted to be an “Ultra”. Ultraromance and Ultratradition really have it all: the looks, the tan lines, the grey tires, the lycra, then the wool and the HAIR (don’t get me started on the hair!). Like most of you, I grew up watching these guys on TV and at the age of 15 I REALLY aspired to be the next Ultraromance when I grew up. I used to travel out to all their road races and got to see Ronnie COOL Romance win 8 road races in a single season wearing his stunning Team Wooly Mammoth colors. His category was called Cat 5, which he assured me was high up in the pecking order of athletic accomplishments.

Today we’ve got another bike that was displayed at the French constructeur event, Concours de Machine. Built by Jolie Rouge Cycles, this all-mountain steel full suspension is outrigged with bags, racks, and more. As someone who owns a steel full suspension, it’s amazing to see the ante upped in this manner but that’s just the half of the weirdness that’s about to unfold for you so read on below for the builder of this bike, Julien Fritsch’s words and photos!

Over the past year, I’ve had quite a few people roll through Santa Fe on road trips. Knowing Covid is still running rampant all up and down the Rockies, I usually opt for a meet-up outdoors. Whether that means for a cup of coffee or a bike ride, I like catching up with people but want to err on the side of safety these days. Last March, our good friend Gideon came through town with his new-to-him Madrean 27.5 hardtail. If you recall our Shop Visit with Madrean – and our older Shop Visit from 2013 with Cycles d’Autremont – then you’ll recognize Hubert d’Autremont’s handiwork…

Coconino Cycles is a builder based in Flagstaff, Arizona. Steve Garro specializes in off-road oriented bikes like this Cruiser he made for Chris Reichel, who works for Why Cycles and Revel Bikes. When I was in Carbondale, Colorado last month, I managed to sneak away with this bike for proper documentation so check out more below.

This weekend brings about Unbound Gravel, in Emporia, Kansas and I managed to catch up with a few friends who are taking on the 200-mile route… on a tandem. It’s not just any tandem though, so let’s check it out in detail below.

Steel is real. We all have personal paths when it comes to cycling and it’s serendipitous when our favorite bikes can adapt to align with these twists and turns within this cycling journey. My Retrotec has long been one of my favorite bikes. In the time I’ve owned it, I’ve swapped out the drivetrain, brakes, fork, wheel size, yet this latest permutation is easily the most drastic…