Radar Roundup: Rons Ortho Bars, Retrotec 30th Tees, Mosaic UDH, Neko Cycles Reflectors, Mission Workshop Flow, Voler Air Sun Hoodies, Queer Cyclist Top Picks, and GCN Visits Steel Vintage Bikes

Our Radar Roundup compiles products and videos from the ‘net in an easy-to-digest format. Read on below for today’s findings…

Ron’s Ortho Bars In Stock at Crust Bikes $120

As we’re writing this these high-demand bars are still in stock but they might have sold out by the time this is being published.

Uncle Ron’s Orthopedic Back Bar “Ron’s Ortho Bar” is a high-performance spinal alignment tool for the aging athlete. 3 unique comfort tech hand positions matched with the industry-leading width tame the wildest of 2 wheeled stallions. A handlebar that you can point down the Boca boardwalk, GDMB trail, and everywhere in between… spinally aligned like a stoic statue of your departed youth.

A long 110-130mm stem is recommended for the Xtreme comfort tech sweepback of these bars. No end shifter compliance to prevent trail stabbing from the pointy protrusion. Made of 7000 series aluminum. 400 grams. 26.0 clamp diameter!

Specs:

Made in Taiwan using Heat Treated Aluminum
Colors- Polished or Black
Clamp Diameter- 26.0
Width- 690mm C-C aka 69cm (nice)
Rise- ~80mm Center of Clamp to Center of Grip Area
Outer Diameter- 22.2mm
Inner Diameter (At the Ends)- 17.75mm
Grip Area Length- 165mm (Grip the whole bar though! Look at all the hand positions!)
Weight- 400g

Check out more at Crust Bikes.

Retrotec 30th Anniversary Tees Pre-Order $30

This year, Retrotec is celebrating its 30th year of making bikes in California. To commemorate this outstanding achievement, Curtis has opened up a pre-order for theses Retrotec 30th Anniversary tees. This is a limited edition run that we will have for sale at the MADE show in Portland later this month. Order yours now and it will ship around August 30. Designed with famed Santa Fe artist Jeff Hantman.

If you are local, as in you live in and around Napa, CA, and want to buy a shirt and pick it up from the Retrotec studio, use code LOCAL at check-out to remove shipping charges. Do not use this code if we will be packing and shipping to you.

Check out more at Retrotec.

Mosaic Cycles SRAM UDH Compatibility

We’re just a few weeks from MADE, a showcase of framebuilders’ talents, and a lot of builders are teasing our new tech advancements for their bikes, including Mosiac Cycles, that just announced SRAM UDH/Transmission compatibility with their new frames.

“If you’ve been paying attention to the mountain bike world, then you likely know that just a few short months ago SRAM not-so-quietly launched their latest drivetrain innovation – Transmission. The Transmission (T-Type) drivetrain is anchored around one absolutely critical feature – Universal Derailleur Hanger (UDH) compatibility. The T-Type derailleur ditches the conventional derailleur hanger altogether and mounts directly to the frame in question. To accommodate this, the frame itself must be designed with a UDH, and a dropout that accepts the direct mount T-Type Transmission rear derailleur. “

Check out the full press release at Mosaic.

Neko Cycles Reflectors

Want to add some visibility and fun to your commuter or tourer? Check out the Neko Cycles Reflectors. These simple, bungee-attached reflectors can be strapped to your seatpost, saddle pack, rack, or even belt loop on your pants and will shine bright when a car’s headlights hit them. Available in a variety of designs – our two favs are displayed here – and are in stock at Neko Cycles.

Mission Workshop Flow Series

This limited edition Mission Pro Jersey and Pro Bibs features graphics inspired by high-speed movement through desert and forest landscapes. As with MW’s standard edition, the Flow Jersey is designed to provide a sleek fit and second-skin comfort no matter your body type or position on the bike. With details that include a longer cut-back panel for coverage when in the drops, a low collar that won’t constrict, and a sweatband along the back of the neck, this jersey is a perfect fit whether you’re smashing at the front or adventuring backroads day after day.

As for the bibs, Dyneema side panels and Italian textiles create a breathable, quick drying, and incredibly durable cycling bib. The bib features easy-access side cargo pockets and two rear touring pockets to carry all the essentials.

Specs:

Jerseys:

Italian Performance Textile
Dyneema side panels
Right and left side cargo pockets
Elastic Interface® chamois
Reflective side highlights
Two Rear bib pockets
Made in Italy

Bibs:

Italian Performance Textiles
Dyneema side panels
Right and left side cargo pockets
Elastic Interface® chamois
Reflective side highlights
Two Rear bib pockets
Made in Italy

Check out more at Mission Workshop.

Voler Men’s and Women’s Air Sun Hoodies $79

After John’s review of the Ibex Sun Hoodie, we found out our friends at Voler are making their own, right here in the USA. These UPF 35+ hooded, long sleeve sun shirts, are built from stretchy, soft, quick-drying mesh, sourced and made in good conscience in Voler’s facilities.

Specs:

Lightweight Sun Hood: Lightweight mesh hood provides UPF 35+ sun protection on the neck and ears.
Secure Thumb Holes: Reinforced openings and an extended sleeve protect the backs of the hands without slipping.
Breathable and Quick Drying: Lightweight mesh construction, made with micro polyester and elastane, offers great moisture management and increased airflow.
Sun Protection: UPF 35+ coverage throughout the garment that doesn’t wear off.
Four-Way Stretch: Extra adaptable fabric engineered to move with you.

Check out more at Voler.

Queer Cyclist’s Favorite Gear of 2023

Hannah from Queer Cyclist has pulled together a list of her favorite gear of 2023.

Steel Vintage Bikes | GCN Checks out Berlin’s Coolest Bike Shop

Berlin is renowned for its cycling culture; it’s home to plenty of vintage bicycle shops and cafes. One of the coolest and best known is Steel Vintage Bikes, a rapidly growing vintage cycling cafe and home to some iconic bikes from cycling history. Join Hank and Manon from GCN as they check it out!