category
I had been holding back on these notes for about a year now because I felt that calling it a “review” sounded like too much. The audience here is used to deep comprehension reviews and it’s very intimidating to put it in the same category when my experience with bicycles is reduced to the five I’ve owned in my adult life, this one included. So instead this is more of a short story about a bicycle, with hints of technical information where it feels required.
I’d assume many of you, like me, have a 15mm thru-axle gravel fork that you would like to convert to 12mm. Every time I review gravel or all-road wheels, they come in 12mm and I have to spend time searching and ordering 15mm cups for the hubs. Let me tell you, it’s a waste of time. I looked for a while for a conversion kit to change my 15mm fork to 12mm but never found anything. The other day, I stumbled upon an eBay seller who makes a handy 15mm to 12mm conversion kit for just about every fork on the market. The account is JJP&E and it really is as simple as you’d imagine! Check out an in-depth look below…
The Kenai 250 is a 257-mile, self-supported mountain bike race in the Kenai peninsula, the only area in Alaska with a large network of singletrack trails maintained by the forest service. The race organizer, Michael Braun, stitched together a route that connects the trails with highway miles. It’s 60% singletrack and 40% pavement. The race has been going on since at least 2013. This year, with 36 starters, it’s a record setting year for participation. This will be my first time racing it. I grew up in Alaska. It’s amazing to have the opportunity to ride and race in my home state. A couple weeks ago, Rue and I went out to tour the trails– several of which I’d never ridden. In a single day, from my bike seat, I saw a moose cooling off in a pond and both a lynx and a grizzly bear crossed my path. Alaska is still very wild. I’m really looking forward to riding through the night and experiencing this full route in one go. It would make a great multi-day tour as well.
Over the past few years, I’ve found myself only riding 150mm travel hardtails and full suspensions with slackened front ends and steep seat tubes. In my mind, why would you want anything else? Then I moved to Santa Fe, where we have even bigger backcountry loops, steep climbs, and long, rocky descents. Yet, we also have sweeping, undulating XC trails. Suddenly, all those 150mm bikes are a little too much for a lot of the trails here, most of which are in my neighborhood. Then Chumba came to the rescue, sending along their Sendero 130mm 29er hardtail for me to review and I fell in love with XC bikes once again.
Read on for how this beauty of a bike handles our chunder and Chamisa-lined trails here in Santa Fe…
Hydraulic shifting? 13 speeds? What in tarnation?
That’s what was going through my head when I first saw Rotor’s 13-speed drivetrain kit at Sea Otter last year. The 1×13 kit is a follow up to Rotor’s Uno 2x groupset from four years ago. Like the Uno, the 1×13 uses hydraulically-actuated shifting for a groundbreaking industry first. As you might imagine, this tech is pricey, and probably not for everyone, myself included, but over the past few months, I’ve enjoyed riding it on this beautiful titanium chassis by none other than Merlin Bikes. Check out a full review of Rotor’s 1×13 and the Merlin Sandstone Gravel bike below.
Out of all the bikes I personally reviewed or even rode last year, the Cannondale Topstone carbon was not my favorite. Yet, I really loved the 2018 aluminum Topstone! Go figure. As I stated in the initial review, it felt too gimmicky for all the engineering that went into it. I felt like it was lacking something extra to truly make it stand out from Cannondale‘s history of making kooky, yet practical suspension bikes. A whole year has passed but my wish would finally come true. Was it worth the wait or the extra engineering? Read on below to find out.
John Watson picks up this series we began with Ryan Wilson during the pandemic. Consider this a shout out to our favorite small businesses in the cycling industry. Here are some of John’s personal picks.
Small businesses are the foundation of the outdoor industry and many have been seriously impacted by the pandemic over the last couple of months. While money is understandably tight for a significant portion of people, if you do have the means and are dreaming up your next bike trip or local ride, I wanted to offer up a few suggestions for gear that I believe is worthy of investing in from some of my favorite small businesses in the industry.
On a recent ride, I broke out my trusty Mini Sawyer filter, after storing it per the instructions and cleaning it the night before, to find that it just didn’t work all that well anymore. Granted this filter had probably only been used once or twice before. The stream from the filter was more of a trickle which struck me as odd as I haven’t filtered any silty streams. Granted, when you’re re-hydrating, you should be sipping water, not chugging it so it didn’t bother me at the time. Filling my bottles though, took forever.
It leads me to think there has to be a better filter for smaller, back-country rides where water is a concern. We have lots of streams, creeks, and tributaries here to drink from on big rides, which is nice but I’d love to find a better filtering option. We use an MSR pump filter for bike and backpacking trips but they take up a lot of space. Filters like the Scout Inline and MSR Thru-Link inline filters look appealing but what if you don’t ride with a bladder all the time? Steripen? Iodine? Surely you’ve got opinions, so we’d like to head what you use!
It had been years since I’ve ridden singlespeed and to be honest, I was pretty reluctant to do so here in Santa Fe. We’ve been in town for about two months now and it’s taken a while to get used to the elevation. Our house is at 6,800′ and the local trails start around 7,000′, shooting up to 12,000′. It’s a lot to take in but for the more flowy cross-country trails, I felt like I could get away with one gear and I knew just the bike for it!
My Retrotec is one of those “forever” machines. I could never sell it as it feels like it’s a part of this website. Plus, the maker – Mr. Curtis Inglis – is just such a stand up guy. When you ride a Retrotec, you put a smile on Curtis’ face and if you’ve ever met the guy, you know that’s well worth it!
Back in 2016, at the end of the #dflthedivide trip, there was a great little 40th-anniversary party at FreeCycles in Missoula to celebrate Adventure Cycling turning 40. At this party, there was a real nifty bikepacking rig from a small company that was right at home in a nonprofit shop. The Advocate Cycles Hayduke. Now, Advocate has transformed into Esker Cycles, and though the road and touring frames are no more, Hayduke Lives! (on). These are my impressions of this nifty hardtail.
Announced today, the follow-up to ENVE’s OG mountain fork is their new Boost Mountain fork. This fork has a few clever details, with some welcomed additions that make it a great ally for your bikepacking setup. Read on below for a deep dive using John’s Sklar 29+ desert rat rig as a model…
Ryan Wilson kicks off a series we’re launching during the pandemic, a shout out to our favorite small businesses in the cycling industry. Here are some of Ryan’s personal favorite products!
Small businesses are the foundation of the outdoor industry and many have been seriously impacted by the pandemic over the last couple of months. While money is understandably tight for a significant portion of people, if you do have the means and are dreaming up your next bike trip or local ride, I wanted to offer up a few suggestions for gear that I believe is worthy of investing in from some of my favorite small businesses in the industry.
For the astute bike nerd, with the unfettered access to the internet that many of the socially distant are currently experiencing, it is evident that hardly a day passes without some bike brand announcing their revolutionary new gravel bike into an increasingly crowded marketplace. Shorter chainstays! Bigger tire clearance! More braze-ons splooshed all over the frame! Into this current apocalyptic wasteland of the gravel racer without a race is born the Lickskillet. Springing from the loins of REEB (yes, that is BEER spelled backward) the venerable bike/brewing company in Longmont Colorado. As they say, each REEB is “Barn Built Because it Matters”.
Bicycle storage in your home or apartment is hard! Especially when your bikes have wide bars and big tires. Over the years, I’ve found the best way to store bikes is hanging from the wall but the main issue is finding hangers that are durable, won’t scratch your wheels, and won’t bend over time. When we moved into our new home, I hung my bikes in a small room and posted about the process on Instagram. In doing so, I got a lot of requests for a write-up here on the Radavist. So here we are!
Now, I did a lot of research and found the best option for wall-mounted hangers but you should know there are a few key details you don’t want to miss.
I’m not alone when I say how much I love a good basket bike. Typically, you either run a Wald basket with the stock struts and that’s enough. Many people run a Wald, sans hardware, zip-tied to a rack. Pelago has taken the latter and made a rack and basket in one. It’s called the Rasket and it’s a sturdy resolution to create the ultimate basket bike.
Back in the summer of 2011, Dario took off on a solo tour, from his home town to Rome and back. This tour totaled over 2072.7km and changed the way he looked at the world. Tours and long rides on a bike are like that. Those long hours pedaling can really bring out the creative juices. The endorphins, the sights, sounds, smells, and the people you meet on the road broaden your perspective. You’ll often hear of these experiences as being life-altering and for good reason.
While in Rome, Dario met the team at Associazione Ex-Lavanderia, a bicycle frame building school and when he returned home, be began welding. Many hours were spent perfecting the art and over the past few years, Dario has had many teachers to aid his torch. Mattia (Legor), Dario Pegoretti, Gianni Gilardi and Preda, Stucchi and Perego have all passed down their knowledge to Dario.
When the time was ready, he launched Bice Bicycles where Dario builds road, all-road, gravel, touring, and mountain bikes. I was set up with a review of his most interesting offering, the Wandrian, through Biciclista, the US distributor for Bice Bicycles and Ingrid Components.
To fill in the gaps between normal, group-ride-oriented bicycle stories, we’re featuring a few rides from the staff over here at the Radavist, beginning with Spencer’s Orbea Loki.
When it was finally time for me to accept that my fatbike just wasn’t that good of a trail bike, I looked to the next best thing, a plus bike. I finagled my way into Interbike a few years back and made it my mission to ride all the plus bikes at the dirt demo. Turns out they were damn fun, the Advocate (now Esker) Hayduke was the winner of the day in my eyes, right in front of the newly updated Karate Monkey. At the time I worked for a guide company that had a fleet or Orbea’s bikes, and they sent our company a closeout list with some discounted bikes at cost. I saw a swoopy aluminum 27.5+ hardtail that looked like it might just be the ticket. I figured I could fit an XL and hopefully, that would give me the most framebag space since I planned to use this as that ever-fleeting idea of a quiver killer.
After reviewing the Starling Murmur Factory early last year, I placed a deposit for one myself, springing for the made in the UK front triangle, made in Taiwan rear swingarm model, in a larger size than the demo large I reviewed. Joe and I discussed the bike, I sent in the money needed and waited. A few months later, Joe alerted me that the bike was done and he shipped it to the United States. Little did I know that I wouldn’t see the bike for almost 8 months later.
