The Radavist

I still look back at my time in Austin, Texas, with the fondest of memories, thanks to the many people I met while living there. I got to know the most amazing, down-to-Earth, truly unique souls in the five years I called Austin my home. Many of which I’m still quite close with today. A few have since moved on to other cities and are doing big things in their respective new homes.

One of which is Taylor Wallace, a fella I met at Flat Track Coffee years back and have since gotten to see the life he’s made for himself in Bozeman, Montana, where I’ve been visiting for a little over a week now. Taylor owns a coffee company which he operates with his brother, Gavin, called Roly Poly Coffee. We haven’t featured many coffee shops here at The Radavist but Roly Poly, as an extension of Taylor himself is much, much more…

Today, we’re elated to announce a project that has been in the works for some time: our own special and limited edition Radavist Mosaic GT-2X complete bikes. There’s a lot going on with these bikes, so let’s jump right in!

The Sweet Spot from Bozeman, MT-based Sklar Bikes is a steel hardtail mountain bike designed to be a venerable quiver-killer. Built around 150mm of front suspension, with clearance for up to 29 x 2.8 tires, its geometry embraces builder Adam Sklar’s mantra of “fast is fun, but fun is fun-er.” Sweet Spots were Adam’s first foray into offering a small batch frame design and sizing, which he hopes will make his bikes more accessible and faster to produce.

I picked up a Sweet Spot of my own earlier this spring after many years of searching for the perfect hardtail. Due to a few requests I had to make it even sweeter, it turned into a custom project that retained the established Sweet Spot geometry and material selection. Below, let’s take a closer look at my build in addition to a brief interview with Adam about these bikes and his design/build process!

In our previous story, we showed you Atom Cycles’ workshop in Ojo de Agua, in the State of México, but here we’ll take a look at two of their finished bicycles. What better example to look at in-depth than the personal bikes of Dulce and Wladimir, the couple behind the name.

Part of the fun in restoring vintage bikes is the process and sometimes that process feels more like a puzzle than a transaction. From finding the correct components, to frame finish repair, and even saving a frame from a metal scrap yard! The Pro’s Closet‘s founder, Nick Martin, shares with us the wild story about how he came to own a truly rare frame, a Breezer Series III, by rescuing it from a scrapyard in Canada! Read on below for this wild tale!

This year brought about the return of the Handmade Bicycle Show Australia, and we had our mate Andy White from FYXO on the ground documenting some of Australia’s finest handmade bikes. Part 03 of our coverage showcases 15 unique builds from the show, so read on for more!

This year brought about the return of the Handmade Bicycle Show Australia, and we had our mate Andy White from FYXO on the ground documenting some of Australia’s finest handmade bikes. Part 02 of our coverage showcases 12 unique builds from the show, so read on for more!

The late 80s and well into the 90s marked a sea change in mountain bike design. Suddenly bikes that were designed to ride fire roads and trails with no real intention were being hurdled down mountains at breakneck speeds. Competition between the brands within the burgeoning sport was fierce, and the race to produce lightweight racing bikes had begun. Perhaps the most infamous of these experimentations is the Yeti C-26, and today, we have some juicy photos of Juli Furtado’s C-26 WC race machine with an entertaining account of this bike’s genesis by Mike Wilk…

This year brought about the return of the Handmade Bicycle Show Australia and we had our mate Andy White from FYXO on the ground documenting some of Australia’s finest handmade bikes. Part 01 of our coverage showcases the opening night of the 2022 Handmade Bicycle Show Australia so check out Andy’s wonderful photos below!

When I started working here at The Radavist full-time last fall, one of my first projects was collaborating with Jarrod Bunk on the builder galleries he photographed at the 2021 Philly Bike Expo. It was a great project for me at the time, as I got to interview many of the builders about the bikes they showcased and, more generally, their individual framebuilding ethos. Designing and building bicycle frames is, for the most part, an individualistic pursuit and I always enjoy learning about how builders’ personal backgrounds and experiences become physically manifested in their craft. As alphabetical order would have it, the file folder labeled Amigo Bug Out was the first I opened and I instantly fell in love with the bike I found inside. The Bug Out had everything I’d been looking for: shreddy geo, setup versatility, innovative design solutions, beefy tire clearance, and badass artwork from my buddy Casey Robertson.

After a few emails and brief phone calls with builder Zach Small of Nashville-based Amigo Frameworks, I was more than stoked to put my name on the list for the initial run of Bug Outs. Zach and I ended up talking even more over the following weeks and when we determined the bike would be built and painted in time for the annual Gosh Darn Gravel Gathering, we hatched a ridiculous plan for me to travel to Nashville, build up my bike in his shop, and then ride GDGG together. Ergo, from the coverage we’ve already shared, I had a great and productive time with Zach and I not only returned home with a hellova fresh bike, but also a new friend… or I should say amigo.

Continue reading below for an immersive look inside Amigo Frameworks and to hear more about Zach’s path toward becoming a full-time framebuilder!

Vintage mountain bikes have a special place in our hearts over here at The Radavist. From vintage klunkers to fillet-brazed beauts, it just seems like bikes from the early years of mountain biking were ahead of their time in a lot of ways. When the pandemic hit, I found myself browsing forums, eBay, and emailing collectors to build up some vintage rides. I was inundated with all the tech that was coming out, yet wasn’t available to consumers, and just felt like revisiting my passion for old bikes would reinvigorate my love of 26″ wheels and friction shifting. This Ritchey is the most recent of three bikes that I built up over the past few years in the pandemic and was by far the biggest undertaking for me. The process included painting some Tom Ritchey fillet Bullmoose bars to match and fixing some shoddy paint on the frame itself.

This bike needed a complete build kit, as I bought it as a frameset, so I spent a lot of time speccing the build while utilizing some of the NOS components I’ve been sitting on for a few years. The end product is something I’m truly proud of and Cari and I had a lot of fun with the photos here, so enjoy!

This morning, we have Dom from Fairlight offering up an explanation of their new MTB, the Holt. While it’s labeled as an XC MTB, bikes like this can be so much more, so continue reading for Dom’s explanation of this new platform…

Editing the photos from my visit to Baum Cycles this February, an eerie feeling came over me. I knew it’d been some time since I last took photos with the ‘big camera’ at 7 Seabright St, North Shore. For some reason, it felt like a precise period of time. My suspicion was confirmed. 10 years.

Earlier this year, Locke Hassett had the pleasure of spending a few months riding Breadwinner Cycle’s Bad Otis. This modern 27.5-inch wheel hardtail – with snappy short 415mm chainstays, 66° headtube angle, and 160mm of front suspension – presented him with some interesting considerations about mountain bikes, the sport as a whole, and what it means to him. Continue reading below for Locke’s in-depth review of the Bad Otis, along with some other relevant revelations…