The Radavist

It isn’t often that I have a chance to stop by a custom frame-building shop in places where I typically like to tour, but upon arriving in Colombia, it was clear that cycling culture in this country is on another level. During weekends in Bogotá, it was not uncommon to see large herds of spandex-clad riders hanging out at coffee shops with fancy gravel bikes or amongst a sea of other riders, dancing on the pedals up to “Patios”, the local roadie hotspot.

Walk into a random bakery in any town throughout the country and it would be no shock to see some obscure (to me) bike race on TV, with a group of abuelas keenly following the action as they enjoy an almojabana and hot chocolate. Catch yourself cruising down one of the many cycle paths in Bogotá and you might just get dropped by a dude in jeans with a backpack heading to work. When it comes to cycling, Colombians are built differently. Read on for a behind the scenes look at my visit to the Colombian builder Scarab Cycles.

Sanitas Cycles is the titanium framebuilding operation co-led by David and John Siegrist. With his father’s work at DEAN Bicycles acting as the backdrop of his childhood in Boulder, Colorado, Dave decided to start working in bikes upon graduating from Fort Lewis College in Durango, convincing his dad to join him in his new titanium label. Read on to learn how John and Dave are merging the classic and the modern in their stock frame offerings and custom builds, and check out a short video from Colt Fetter’s time at the shop!

Argonaut’s GR3 gravel bike combines the trademarked GravelFirst geometry with a custom rider-specific carbon layup to create what the Bend, Oregon-based frame and component builder claim to be a “rip-capable gravel bike unlike any other.” So, what does Petor Georgallou‘s time as a high schooler working at a video rental shop have to do with the Argonaut GR3? And, if he tells you he likes the bike, will you even believe him? Read on to find out…

The MCR Descender was a bicycle ahead of its time. It was the first suspended mountain bike and dreamed up by Brian Skinner whose contributions to mountain biking would go on to span the entire sport. On the technology side, Skinner started with the Descender but later led development on innovations such as index shifting, trigger shifters, SPDs, Onza porcupines and Answer taperlites. His first passion in the sport of mountain biking was as a race promoter though, and it was from that passion that the other half of this bike’s name MCR — Mountain Cross Racing —was born.

In this shop visit with Saffron Frameworks in London, UK, Sam Rice traces a line from Matthew Sowter’s previous life as a chef to his current trade as one of the most awarded frame builders in the world. Matthew’s skill in transforming basic ingredients into magnificent dishes transfers over into his ability to turn a box of tubes into a frame deserving of the word “perfection.” Materialism may be a concept of the past, but it is very much alive in Matthew Sowter’s craft.

Living in the Phoenix, AZ metro area, I get to connect with a variety of interesting folks who travel here during the winter months. Like Western Sandpipers, Sandhill Cranes, Golden Eagles, and other airborne travelers of North American migratory flyways, humans also flock to warmer climes in the Sonoran Desert’s overwintering sites. On a recent trip to my neighborhood caffeine dealer, Cartel Roasting Co, my jaw dropped when I saw Richard’s handmade cruiser parked out front. Visiting from Winnipeg, Manitoba with his wife Michelle, the couple snowbirds in Arizona to connect with friends and ride bikes. Before I knew it, Richard and I had talked for nearly an hour about his love of vintage bikes, cycling for physical and mental health, and his recent forays into building his own framesets. Let’s take a look at his most recent creation below!

With the headlights pointing north, I departed at sparrow’s fart, my destination: Beechworth. It’s a little over a three-hour jaunt from Melbourne along the Hume Highway. The drive is punctuated by rolling hills, bouncing kangaroos, and petrol (gas) stations. Historically known for the gold rush of the late 1800s, I was heading there in search of the slightly less precious metal of steel – crafted by the hand of Shane Flint of Tor Bikes.

Next week, I’m loading up the Troopy and heading West to the Keyesville Classic. Every year, vintage mountain bike aficionados descend upon the Kern valley to race vintage bikes while the “real” race occurs. This vintage race is quite the spectacle, and if you’ve never seen it in person, you ought to check out Erik Hillard’s gallery he shot a few years ago for The Radavist.

At any rate, I just finished buttoning up my bike I’ll be bringing to Keyesville to ride and, yes, take part in the vintage race. Let’s check it out in detail below…

There have been several storied chapters in R+E Cycles‘ 50-year history but, as Katie Sox describes, the through line has been a commitment to crafting the bikes that best fit their customer’s needs—even when those bikes have five seats. On the brink of new ownership and as they celebrate 50 years of frame building and service, read on for a closer look behind this stalwart in Seattle’s cycling scene.

Many different forms of cycling contributed to the development of the mountain bike, including balloon tire bikes, touring bikes, and BMX bikes. Separate from that was the influence of motorcycles, and more specifically off-road motocross bikes. The early suspension fork pioneers — Paul Turner (Rock Shox), Mert Lawwill (Lawwill), Horst Leitner (AMP), and Doug Bradbury (Manitou) — all came from motorcycle backgrounds and knew the benefits of suspension. But before that innovation came about, Doug Bradbury began by building fully rigid mountain bikes. In this edition of our Vintage Bicycles series, we look at Doug’s personal 1987 Manitou…

Every bicycle has a story behind it, especially those that are dreamt up over a period of years and eventually brought to life and built from the ground up. This absolutely stunning titanium Black Sheep ‘Speedster’ fat bike is definitely no exception. One could argue it’s a bit of a stretch, but in this case, this bike’s story involves skateboarding and a decades-long journey from the east coast to the west coast, and finally the southwest.

It’s cold and blustery in Santa Fe these days so, much like Hailey, I’m riding more pavement than I’d normally like and have put riding the mountainous trails on the shelf for the moment. Winters are great for water levels in the west, especially ones like the winter we’re having this year. Not much gets me out of the house on windy days, and battling headwinds in a 20º “real feel” is not this desert rat’s cup of tea.

Yet, living in a tourist hub, I often get hit up to meet with travelers passing through town. Sometimes, they want to catch up over a cup of coffee, other times; they have a bike they want me to see. The other morning, I got a message from Brian, who was returning from the Baja Divide with a unique bike in tow…

Following up on their previous shop visit, Daniel and Karla take us back to Básica Studio in Mexico City. This time they delve deeper into a larger spectrum of Básica’s bikes, along with some updates on builder Eli Acosta.

The mountain bikes of the late 1980s were not prepared for what the 1990s would bring to the American framebuilding scene, which was on the precipice of the aluminum revolution. Aluminum bikes were lighter and featured oversized tubing diameters, making a buff canvas for some wild paint jobs. This 1990 Klein Attitude is perhaps one of the most iconic bikes, donning the “Team USA” or “Dolomite” colors; green, white, and magenta—all sprayed on Klein’s thicc “Aluminum Power Tubing.”

While I was in Los Angeles, camping out at The Cub House, Sean got this bike all polished up for a quick shoot, so let’s check it out below!

This is part two of an in depth conversation between Tom Ritchey and Ryan le Garrec where Ryan seeks to identify key periods in Tom’s life alongside key people. Perhaps second only to Tom’s father, it seems that Jobst Brandt had significant influence of the young Tom. Below, Ryan shares excerpts from Tom’s side of their conversation that highlight Jobst’s character, his notorious rides, and his lasting impact. Enjoy!

Brave New Wheel bike shop is a Fort Collins, CO staple and community hub that has been around since the 1980s. Co-owned by Johnny Daggett and Mike Woodard, the shop focuses on service and repair, wheel-building, and suspension work. Johnny recently finished building a Monē Bikes El Pebblito gravel rocketship with custom Squidfork from local builders Oddity Cycles. Continue reading below for Johnny’s full rundown with a chilly photoset from Aaron LaVanchy…