The Radavist

NAHBS is here and already on setup day, it’s evident what bike has dominated the show: the 27.5+ hardtail. While this bike isn’t currently built as one, it can be. Thanks to a new project… Sean from Soulcraft, Cameron from Falconer and a machine shop called E13 have developed a yoke that gives ample clearance for a 27.5+ tire, while still accommodating various crank setups. While you can run a frame such as this as a dedicated 27.5+ bike, Sean wanted people to be able to throw their 29r wheels on it as well.

This detail, along with a stealth dropper, curved seat tube, slack n low geometry provide more than enough opportunities for a highly shredable bike.

Oh and those White Industries cranks… More on those later!

The Soulcraft Dirtbomb is an incredibly versatile bike and a worthy tool to tackle an event like Grinduro. It’ll eat up dirt roads, singletrack and pavement alike but most importantly, it’s strong enough to withstand the after party. Which at events like last weekend, tend to go on ’til dawn.

Sean from Soulcraft knows a thing or two about handmade bikes. He learned the trade from legends like Bruce Gordon and Salsa Cycles, so it’s fitting to see his framesets carrying on many of these ideologies, just in an updated, modern form.

This bike in particular clears the Bruce Gordon RockNRoad tires, features PAUL Klampers, Chris King and WTB wheels and SRAM’s CX1 group, with a 10-42 cluster.

Like I said, it’ll take on anything you throw at it and still party ’til dawn.

For framebuilders, there’s no better test for their product than a long bike tour. When I last saw Brian, he had just completed the Baja Divide on a bike he built. At the time, he had just left the outdoor industry and hoped to transition into building frames full-time under the Rare Earth Cycle Craft banner.

His hardtail was one of my favorite bikes I documented this year until I saw his Tour Divide bike…

We’ve had a busy year over here at The Radavist. From the return to being 100% independent, launching our Group Ride subscription service, our Rad Bazaar marketplace, and adjusting to being a small business owner again, my free time has been limited. Yet, I can thank a few products for making my job and life easier this year, along with the albums that became the backdrop for my rides, so let’s check out my Favorite Products of 2023!

“It’s just a bike.” The late Bruce Gordon built bicycle frames to enhance his customers’ lives. Through all my interactions over the years, up until his passing in June of 2019, he would take praise for his work, but would always end the conversation with: “It’s just a bike.”

To talk about this bike in particular, you first have to know Bruce. Who he was, his ethos, the mythos, and what he brought to the “g” word: gravel. Bruce was making fat-tire road bikes for a long time. Long before many. He developed tires, toe clips, and helped foster an entire movement of makers in the Petaluma, California area and beyond.

But just like that, he was gone, and he left behind a legacy…

While he and his wife were on holiday in Santa Fe, John got in a few rides with Steve Rex who brought along his fillet-brazed hardtail. Since Steve wasn’t at the MADE Bike Show, John wanted to give the Sacramento-based builder a spotlight of his own, so read on for the full gallery…

Each framebuilder has probably their own relationship with the Concourse de Machines. Mine is not monochrome.

On the one hand, there is the excitement of creating a product with soul and sharing it with the framebuilding family. Our profession is “socially” atypical. It is at the same time very solitary: us and our ideas, our tools, the calm atmosphere of the workshop. And it is also inevitable to expose the brand/our work on social networks, the only lever to promote ourselves autonomously, without counting on the press. During the CDM contest, this too virtual sphere becomes the timespan of a few days entirely palpable and real. I find in the other framebuilders a sensitivity, convictions, a listening that it is hard to find in someone who did not go through the same choice of professional life as me. For many, it remains one. The contest is also about that: talking about our joys, our doubts, our desires, our difficulties, and that makes it very attractive to me.

On the other side, there is this shell that I try to put on myself since the frustrations felt during the CDM 2019. I had a bad experience putting so much soul into a project to feel pretty much unconsidered. Too young, too shy to show off, not enough in the good papers. So I take advantage of each edition to remind myself that we are doing this competition above all for ourselves, to continue to invent ourselves. The look of others is sometimes pleasant and often relevant, but it should not affect our own.

The dawn has barely broken and early rays of summer sunshine splatter golden light across the yard while Meg Fisher throws a ball for her pup Pax. She knows she’ll be leaving him for a good chunk of the day while she gets out for a training ride and wants to make sure he gets some of his puppy energy out before she goes. Her laughter echoes under the trees and her stoke is palpable.  With the great state of Montana as a backyard, the number of trails and gravel roads at Meg’s disposal are enough to make anyone want to pack up and move west.

SimWorks is pleased to present our latest offering in the Doppo lineup of framesets: The High Plains Drifter. These framesets are handcrafted in small batches by our friends, and adept framebuilding cohorts, at Simple Bicycle Co. here in Portland, OR. It’s a modern twist on a time-honored favorite, sure to bring back more than a few pleasant reminders of some of our earliest memories on a bike, while opening up a world of possibility for future off-road explorations.

Here’s to failings and revenge, wet feet, cold meals, big appetites, and desperate measures, here is to the losers, to giving up, the fear and the panic, here is to the hopes and resets, the rest and restart, the loneliness and misery, the conquering or coming back, here is to the revenge, the salute, the lost goal, the drive and emptiness, the stomach and the guts, the brain, and the balls, here is to the brave heart and lost souls. Here is to the step back and rebound. Here is to the cold beers at the end and the diners that taste better.
Coming home was the hardest part.

“Gravel bikes are just XC bikes from the 80s/90s with drop bars.” You hear that over and over again, ad infinitum on the internet. While that might be true to some degree, I think this statement does XC bikes from the 80s/90s a disservice. Back when the big companies were slow to pivot towards innovation, smaller builders were the ones tinkering in their shops, fabricating step-up cassettes, designing bikes with boost spacing, 1x drivetrains, quick-release seatpost collars, and more. It took people like Charlie Cunningham and Jacquie Phelan to really push the paradigm until it broke.

Take, for example, this tribute of Jacquie’s 1983 “Otto” Cunningham, which was built in June of 1983 for a customer in Marin…